Lotus Evora GTE/ GT350 Conversion Bodywork and Interior Trim
Click To Enlarge

The Lotus Evora GTE was unveil to much acclaim in 2012.  The Exciting concept featured extensive carbon fiber bodywork, revised interior and mechanical upgrades.  After years of development, Lotus opted to release the GTE as the GT350 in 2015 as a limited production vehicle with only 20 factory examples produced.

British Racing Group has arranged to have made available both the interior and exterior modification from the same supplier Lotus used for the cars.  This is a very special opportunity for a few individuals to obtain the components to what is widely considered the most attractive and sought after Evora model.

Inquiries will be quoted on an individual basis based on the scope on content of the request.  All pricing will be provided through the supplier at their discretion   Production is extremely limited.  These are not reproductions but made by the same supplier and with the same tooling as the production cars.


The following are a list of pieces available for order:

Exterior

  • Roof cover complete (CF. visible)
  • A-pillar part left and right set (CF. visible)
  • Roof extension (CF. visible)
  • Front bumper (primed for painting)
  • Front bumper flaps left and right set ( CF with clear coat trim around oil cooler intakes)
  • Front bumper mesh grille set (left , middle , right)
  • Daytime running lights (left and right set complete)
  • Front bumper splitter (Cfk. visible )
  • Rear bumper  (primed for painting)
  • Rear bumper adhesive (required with rear bumper)
  • Rear Diffusor (CF. visible)
  • Rear Diffusor frame (CF visible, required with rear diffuser)
  • Rear integrated brake lamp assembly
  • Hella integrated rear fog lamp set
  • Mesh grille for rear bumper (required with rear bumper)
  • Number plate holder panel (CF visible, required with rear diffuser purchase)
  • A Panel set (CF primed for painting.  RH and LH included)
  • Rear side panel set (CF primed for painting.  RH and LH included)
  • Side skirt set (CF visible.  RH and LH included.  Requires A and Rear side panels)
  • Rear clam extension (primed for painting.  RH and LH included)
  • Front upper hood (primed for painting)
  • Front hood panel (CF.  Required with front upper hood)
  • Front hood frame set (CF primed for painting.  RH and LH included.  Required with front upper hood)
  • Front hood frame support  (CF primed for painting. Required with front upper hood)
  • Front hood windscreen washer fluid nose panel  (CF primed for painting. Required with front upper hood)
  • Front hood slat frame (CF.  Required with front upper hood)
  • Front hood slat assembly (CF.  Required with front upper hood)
  • Windscreen trim (CF visible.  Required with front upper hood)
  • Rear aerofoil GT4 style (CF. visible)
  • Engine cover (CF. visible)
  • Mirror cover set (CF. visible, RH and LH included)
  • Side air intakes, upper rear quarter panel (CF. visible.  RH and LH included)
  • Side air intake frame set (CF. visible, RH and LH included.  Required with side intakes)
  • Wheel arch liner set (total 8 pieces)



Interior

  • inner sill trim set( CF. visible, RH and LH included)
  • Inside door panel set (CF. visible, RH and LH included)
  • Door pull set (CF. visible, RH and LH included)
  • Door pocket set (CF. visible, RH and LH included)
  • Floor plate set (CF. visible, RH and LH included)
  • Front seat set (RH and LH included.  CF visible.  Choice of leather finish)
  • Front seat seat holder set (2 sets required.  Required with seat purchase)
  • Rear seat side panel set (CF. visible, RH and LH included)
  • Rear seat (CF. visible)
  • Rear seat cover (CF. visible, 2 pieces included)
  • Rear firewall trim panel (CF. visible)
  • Instrument cluster (CF. visible)
  • Lower console trim panel (for IPS, CF visible. openings CNC milled)
  • Upper center stack/ GPS panel (CF. visible, RHD and LHD available)
  • Instrument panel (CF. visible, RHD and LHD available)
  • Shift paddle set (CF. visible, RH and LH included)
  • Dashboard cover set (black painted.  RH and LH included)
  • Steering wheel column trim kit (CF. visible)
  • 'GTE' badge (Red painted)
  • 'L O T U S ' CF Badge (CF. visible)
  • GTE Edition name plate
  • Footrest- Driver (CF. visible, RHD and LHD available)
  • Footrest- Passenger  (CF. visible, RHD and LHD available)
  • Wheel set (8x19 5.0 frt, 10x20 21.3 rear)
  • Pedal set (brake and gas pedals. anodized aluminum)
  • Central lock complete set (4 pieces req. black anodized finish)
  • Central lock decal (4 pieces req.  Required with central lock)
  • Wheel cover set with Lotus roundel (4 in set)




Contact us at THIS LINK, Parts@BritishRacingGroup.com or add this item to your cart with all fields completed for a quote including shipping worldwide!

 
Pricing and production based on specifications.  These are special ordered items and may not be returned.

  • Item #: BRG-LOTMANEVGTEBW

Lotus Evora GTE/ GT350 Conversion Bodywork and Interior Trim

Price: $0.00
* Marked fields are required.
*
Qty: *